Manchester Minerals Shaping & Cutting

Shaping & Cutting

We offer secure on-line payment ( via 'RBS Worldpay' or 'PayPal' ) that may be used with confidence. Ordering is quick and easy, with most orders despatched within 24-hours. Prices shown are in GB Pounds Sterling.

Online Catalogue | JEWELLERY-MAKING SUPPLIES (Tools, Findings, Books, Silver, PMC) | Shaping & Cutting

Chrome-plated, steel neck mandrels from India

Ref: NeckMandrel

Available in two sizes and offering exceptional value for money. These mandrels may not be the highest quality finish but represent an affordable option enabling expanded production capability. The larger size (92-105) has a collar measurement of about 13.5 inches and a shoulder width of 25cms. The smaller neck mandrel has a collar size of about 12 inches and a shoulder width of 19.5cms. Price of selected mandrel will be shown in the shopping cart.

Priced from:£50.00
£58.75 Including VAT at 17.5%

Please insert Quantity:

Please select one of the following
Small neck mandrel 12 inch 92-104
Large neck mandrel 13.5 inch 92-105

ROLLING MILL Square D & Flat 3 inch rolls (India)

Ref: 92-051

Price:£150.00
£176.25 Including VAT at 17.5%

Please insert Quantity:

Cutter - Indian

Ref: IndCut

We have introduced a new range of LOW COST but very good value cutters and pliers from India.
A simple test of performance is to cut a piece of paper cleanly - it does that!
The box joint ensures jaw alignment and the insulated green, spring-loaded, handles make for comfort and ease of use.
They may not last as long as the qualty 'CEKA' cutters ref 91-001 but you can buy several pairs of these for the cost of one CEKA cutter !
Please select whether 'SIDE' (as illustrated) or 'TOP' cutter is required.

Please insert Quantity:

Type

People who bought this item also bought:
1. Silver Solder (Ref: SilSolder)
2. Sterling Silver Round Wire (Ref: SilRdWire)

Cutter - CEKA

Ref: CekaCut

High Quality cutters from Germany.
Spring insulated handles: Box joint (German)
4.5"
Specify whether SIDE (as illustrated) or TOP cutters required.

Please insert Quantity:

Type

Cutter -Klein

Ref: KleinCut

Low cost but good quality imported 'Klein' box-joint cutter.
Please select whether SIDE or TOP (End -as illustrated) cutter is required

Please insert Quantity:

Type

People who bought this item also bought:
1. Silver Solder (Ref: SilSolder)
2. Sterling Silver Round Wire (Ref: SilRdWire)

RING-CUTTING PLIER

Ref: 91-017

Essential equipment for removing tight rings from fingers. Useful in cases of swollen finger joints resulting from arthritis etc.

Price:£29.79
£35.00 Including VAT at 17.5%

Please insert Quantity:

Related products:
1. CUTTING WHEEL for 91-017 (Ref: 91-018)

CUTTING WHEEL for 91-017

Ref: 91-018

Price:£7.62
£8.95 Including VAT at 17.5%

Please insert Quantity:

Related products:
1. RING-CUTTING PLIER (Ref: 91-017)

SHEAR - BEADING

Ref: 91-007

10cm overall length. 3cm spring-loaded jaws.

Price:£4.26
£5.01 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. BEAD TRAY PLASTIC (Ref: 95-027)
2. White Cubic-Zirconia - Facet cut (Ref: FacetCZ)

Beading Scissors - 25mm curved jaws

Ref: 91-008

Fine point scissors suitable for cutting thin silk or nylon thread after knotting. Overall length 11cms (4.5 inch).

Price:£3.00
£3.53 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. White Cubic-Zirconia - Facet cut (Ref: FacetCZ)
2. Pre-printed Labels for Jewellery (Ref: Labels)

Triblet (Mandrel)

Ref: Triblet

We have a range of triblets and mandrels suitable for forming collets or finger rings etc. Please select the type required from the options below and the associated price will appear in your shopping cart.

Please insert Quantity:

Please select from the following options

People who bought this item also bought:
1. Malachite Cabochon (Ref: CabMalach)
2. Silver Solder (Ref: SilSolder)

TRIBLET - Hexagonal 22cms long 9-23mm dia.(Indian)

Ref: 92-084

A recent addition to our range: Hexagonal cross-section tapered triblet

Price:£15.32
£18.00 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Triblet (Mandrel) (Ref: Triblet)
2. MANDREL BRACELET Smooth (USA) (Ref: 92-099)

SHEAR Curved 7inch

Ref: 91-010

Price:£21.02
£24.70 Including VAT at 17.5%

Please insert Quantity:

Shears

Ref: Shears

British, 7" with non-nip handles.
91-009 SHEAR Curved with spring
91-010 SHEAR Curved 7"
91-011 SHEAR Straight 7"
91-012 SHEAR straight with spring.Price will be shown in the shopping basket

Please insert Quantity:

Shape/Type

People who bought this item also bought:
1. Silver Solder (Ref: SilSolder)
2. Plier - Indian (Ref: PlierInd)

TRIANGULAR SCRAPER (Retract)

Ref: 91-046

A reversible triangular scraper with a hollow-ground blade mounted in a nickelled brass handle with a screw chuck. Length 80mm. Blade (double life) is protected when not in use and may be secured with a short projection for fine work use.

Price:£23.66
£27.80 Including VAT at 17.5%

Please insert Quantity:

TRIANGULAR SCRAPER

Ref: 91-045

Standard 3 inch blade with a bulbous wooden handle.

Price:£6.60
£7.76 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. EAR POST 7mm Flat pad. Sterling Silver (Pair) (Ref: 84-011)
2. BROOCH BAR 3/4 inch. Gilt Plated (Ref: 41-041)

Riffler File Set of 10 180 x 3mm

Ref: 92-026

A set of 10 (cut 2) riffler needle files each with an overall length of 18cms and with double-ended cutting tips of 30-40mm. Assorted profiles including triangular, round, half-round, flat and hand etc.

Price:£15.00
£17.63 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Silver Solder (Ref: SilSolder)
2. Sterling Silver Sheet 0.55mm (Ref: SilSheetGauge8)

NEEDLE FILE (Set of 12.14cm)

Ref: 92-003

Needle Files. Quality set of Swiss Files with round knurled handles in a popular medium cut.
14cm Cut 2. Set of 12 in plastic wallet (Contains an assortment of Crossing, Pillar, Warding, Knife, Barrette, Flat, Hand, Half Round, Round, Square, 3-Square).

Price:£9.53
£11.20 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Blades for Piercing Saw (Ref: SawBladeP)
2. PIERCING SAW FRAME (Adjust.) (Ref: 91-060)

Related products:
1. COLLET NEEDLE FILE HANDLE (Ref: 92-018)

COLLET NEEDLE FILE HANDLE

Ref: 92-018

A collet-type needle file holder for 3mm shank files

Price:£3.82
£4.49 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Silver Solder (Ref: SilSolder)
2. Sterling Silver Round Wire (Ref: SilRdWire)

Related products:
1. NEEDLE FILE (Set of 12.14cm) (Ref: 92-003)

NEEDLE FILE 1/2ROUND 14cm

Ref: 92-006

Cut 2

Price:£3.53
£4.15 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Card boxes (Ref: CardBox)
2. Garnet - Facet cut (Ref: FacetGarnet)

Related products:
1. COLLET NEEDLE FILE HANDLE (Ref: 92-018)

NEEDLE FILE HAND 14cm

Ref: 92-007

Cut 2

Price:£3.53
£4.15 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Amber Cabochon (Ref: CabAmber)
2. 8x6 MILLED CUP (Ref: 86-058)

Related products:
1. COLLET NEEDLE FILE HANDLE (Ref: 92-018)

NEEDLE FILE Flat

Ref: 92-008

Cut 2

Price:£3.53
£4.15 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. COLLET NEEDLE FILE HANDLE (Ref: 92-018)
2. NEEDLE FILE 3-Square (Ref: 92-010)

Related products:
1. COLLET NEEDLE FILE HANDLE (Ref: 92-018)

NEEDLE FILE Square

Ref: 92-009

Cut 2

Price:£3.53
£4.15 Including VAT at 17.5%

Please insert Quantity:

Related products:
1. COLLET NEEDLE FILE HANDLE (Ref: 92-018)

NEEDLE FILE 3-Square

Ref: 92-010

Cut 2

Price:£3.53
£4.15 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. COLLET NEEDLE FILE HANDLE (Ref: 92-018)
2. NEEDLE FILE Flat (Ref: 92-008)

Related products:
1. COLLET NEEDLE FILE HANDLE (Ref: 92-018)

NEEDLE FILE Round

Ref: 92-011

Cut 2

Price:£3.53
£4.15 Including VAT at 17.5%

Please insert Quantity:

Related products:
1. COLLET NEEDLE FILE HANDLE (Ref: 92-018)

3inch HANDLE for files

Ref: 92-013

Price:£0.64
£0.75 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Blades for Piercing Saw (Ref: SawBladeP)
2. Black Onyx Cabochon (Ref: CabBlOn)

Diamond Files

Ref: DiaFile

(14cm) Diamond Files
92-029 DIAMOND FILE Flat
92-031 DIAMOND FILE 1/2 Round
92-032 DIAMOND FILE Round
92-033 DIAMOND FILE Square
92-034 DIAMOND FILE 3-Square

Price:£7.87
£9.25 Including VAT at 17.5%

Please insert Quantity:

Please select cut required from the drop-down list below

People who bought this item also bought:
1. Sterling Silver Round Wire (Ref: SilRdWire)
2. Garnet - Facet cut (Ref: FacetGarnet)

Related products:
1. COLLET NEEDLE FILE HANDLE (Ref: 92-018)

Diamond File economy (Japan) 14cms (Set of 5)

Ref: 92-028

Grit size 120-150 (medium).
File overall length 14cms including a 6cms plastic coated handle and approx 5cms of electro-bonded diamond.

Price:£12.00
£14.10 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. PIERCING SAW FRAME (Adjust.) (Ref: 91-060)
2. BARREL 700gms RUBBER Evans (Ref: 10-040)

Related products:
1. COLLET NEEDLE FILE HANDLE (Ref: 92-018)

ENGINEERS FILE 6inch Hand

Ref: 92-020

Flat with handle, 6inch Cut 2.

Price:£5.52
£6.49 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Aventurine Quartz Cabochon (Ref: CabAvent)
2. Triblet (Mandrel) (Ref: Triblet)

Related products:
1. 3inch HANDLE for files (Ref: 92-013)

ENGINEERS FILE 6inch Half-round

Ref: 92-021

Half Round with handle, 6” Cut 2.

Price:£7.23
£8.50 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Emery Paper abrasive sheet (Ref: Emery)
2. Silver Solder (Ref: SilSolder)

Related products:
1. 3inch HANDLE for files (Ref: 92-013)

HIDE MALLET

Ref: 92-040

Rawhide head pressed and seasoned to ensure uniform quality and maximum durability. Weight 4oz.

Price:£9.77
£11.48 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Silver Solder (Ref: SilSolder)
2. Sterling Silver Round Wire (Ref: SilRdWire)

HAMMER Ball Pein 4oz.

Ref: 92-042

A general-purpose hammer with a slightly domed round face and a ball face. 4ounce head

Price:£9.78
£11.49 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Silver Solder (Ref: SilSolder)
2. Blades for Piercing Saw (Ref: SawBladeP)

HAMMER Cross-pein

Ref: 92-046

A 2oz hammer with a 5\16" dia. round head and 'chisel'. Ideal for riveting etc. 8" handle.

Price:£7.23
£8.50 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. CENTRE PUNCH Standard (Ref: 90-014)
2. Turquoise Cabochon (Recon) (Ref: CabTurq)

25mm Chasing hammer with Pistol Handle

Ref: 92-045

A varnished and metal-wedged wooden handle with a 4cms diameter pistol grip. The flat round, chrome plated, head measures 25mm diameter and the ball end is 12mm.

Price:£6.00
£7.05 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Emery Paper abrasive sheet (Ref: Emery)
2. Silver Solder (Ref: SilSolder)

HAMMER Planishing

Ref: 92-048

British made, polished, round (2cms) and square (2cms) faces. A 5 ounce head on an 11 inch handle.

Price:£16.13
£18.95 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. BURNISHER (Ref: Burnish)
2. Set of 24 Wooden Dapping Punches (Ref: 92-049)

Draw Plates

Ref: DrawPlate

We import these plates direct from India; not the highest quality but they are low cost and exceptional value for jewellers requiring only occasional use. Please select type required - price will appear in your shopping basket.

Priced from£5.10
£5.99 Including VAT at 17.5%

Please insert Quantity:

Please choose type from the following drop-down list:
Select plate type

People who bought this item also bought:
1. DRAW PLATE 63-Hole 4inch Round (Ref: 92-073)
2. Turquoise Cabochon (Matrix) (Ref: CabTurqMatrix)

Collet Plates

Ref: Collet

These quality plates are British manufactured, from hardened and polished steel, with 17o conical indentations and matching steel punches. Holes range from about 2mm to 10mm.
92-053 COLLET PLATE/PUNCH 6-Hole
92-054 COLLET PLATE/PUNCH 12-Hole
See shopping cart for price

Please insert Quantity:

Size

People who bought this item also bought:
1. Black Onyx Cabochon (Ref: CabBlOn)
2. Gemstone Drop (top-drilled) (Ref: GemstDrop)

SWAGE BLOCK 6-groove4-10mm and Flat

Ref: 92-058

Swage Block. 10cms x 4cms overall x 13mm deep.
Combined 6 groove (10mm, 8mm, 6.5mm, 5.5mm, 4.5mm, 4.0mm) and flat (3cms)

Price:£16.17
£19.00 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Silver Solder (Ref: SilSolder)
2. Iron Binding Wire 0.2mm (34guage) ~24gms bundle (Ref: 93-015)

Steel Dapping Block 27-hole 2-25mm 125x60x22mm

Ref: 92-052

An Indian manufactured steel block with ground faces and smooth hemispherical indentations ranging from about 2mm diameter up to 23mm

Price:£20.00
£23.50 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Blades for Piercing Saw (Ref: SawBladeP)
2. Emery Paper abrasive sheet (Ref: Emery)

SWAGE Block with 21 grooves 2-18mm wide

Ref: 92-057

A steel block: overall 15cms x 4cms x 2.5cms thick with forged grooves.

Price:£20.00
£23.50 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Sterling Silver Round Wire (Ref: SilRdWire)
2. BURNISHER (Ref: Burnish)

HORN ANVIL WITH BASE

Ref: 92-070

Sometimes called a 'Bick Iron', this small bench anvil is constructed from a black painted cast iron base into which a polished (& plated) multi-purpose miniature anvil is secured. Although the surface quality could be better, this Indian tool represents good value for money.
The 'prong' of the anvil is about 4.5cms x 1cm.
The base has been drilled so that it can be secured to a bench with two screws.

Price:£6.81
£8.00 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Emery Paper abrasive sheet (Ref: Emery)
2. Silver Solder (Ref: SilSolder)

MINIATURE BENCH ANVIL

Ref: 92-069

Ref 92-069. A plated steel anvil with a ground rectangular top, measuring 5x3cms, extending at one end by 3cms along a flat-topped cone with a 3mm hole drilled in the centre. The other end is a polished cylindrical cone varying in diameter from 15mm down to 2mm. The base of this steel unit is turned flat.

Price:£10.00
£11.75 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Garnet - Facet cut (Ref: FacetGarnet)
2. 25mm Chasing hammer with Pistol Handle (Ref: 92-045)

DOMING BLOCK5cms BRASS INDIAN

Ref: 92-055

A low-cost Indian Brass doming block with about 67 indentations ranging from about 2mm up to 38mm.
Although the quality lags slightly behind the British-made block (92-060), the price makes it extremely competitive.

Price:£20.00
£23.50 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Iron Binding Wire 0.2mm (34guage) ~24gms bundle (Ref: 93-015)
2. Teflon sheets (Pack of 5) 10cms x 10cms (Ref: 89-121)

DOMING BLOCK 6.5cms BRASS INDIAN

Ref: 92-056

A low-cost Indian Brass doming block with about 70 hemi-spherical indentations (the larger ones being polished) ranging from about 2mm up to 45mm.
Although the quality lags slightly behind the British-made block (92-060), the price makes it extremely attractive and the size of this block is exceptional

Price:£34.00
£39.95 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. DOMING PUNCH SET 18 (INDIA) (Ref: 92-063)
2. Silver Solder (Ref: SilSolder)

DOMING BLOCK 2.5cm cube BRASS

Ref: 92-059

Low-cost Indian Brass doming blocks, each with about 56 indentations ranging from 2mm up to about 20mm for the smaller block and 25mm for the larger block. Quality lags behind the British-made block (92-060) but the price makes them extremely attractive .

Price:£7.23
£8.50 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. DOMING PUNCH SET 12 (INDIA) (Ref: 92-062)
2. PIERCING SAW FRAME (Adjust.) (Ref: 91-060)

DOMING BLOCK 3.0cm cube BRASS

Ref: 92-061

A low-cost Indian Brass doming block with about 56 indentations ranging from about 2mm up to 25mm.
Although the quality lags behind the British-made block (92-060), the price makes it extremely attractive if only for occasional use.

Price:£10.64
£12.50 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. DOMING PUNCH SET 12 (INDIA) (Ref: 92-062)
2. DOMING PUNCH SET 18 (INDIA) (Ref: 92-063)

DOMING PUNCH SET 12 (INDIA)

Ref: 92-062

A set of 12 steel punches, from India, to use with the above blocks. With a length of 8cm and diameters in a range of 2 to 13mm. Quality not brilliant but good value.
See also the larger set ref 92-063 below

Price:£10.21
£12.00 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Silver Solder (Ref: SilSolder)
2. DOMING BLOCK 2.5cm cube BRASS (Ref: 92-059)

DOMING PUNCH SET 18 (INDIA)

Ref: 92-063

A comprehensive (card) boxed set of 18 steel punches- from India- to use with the above brass blocks.
Punches have oil-blackened 3/4 sphere tips with oiled steel shafts and a length of about 9cm. Diameters in an approximate range of 4 to 14mm.
Quality now improved over previous imported batches - still not brilliant but good value and functional.

Price:£16.17
£19.00 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. DOMING BLOCK 6.5cms BRASS INDIAN (Ref: 92-056)
2. Blades for Piercing Saw (Ref: SawBladeGross)

Set of 24 Wooden Dapping Punches

Ref: 92-049

Diameters from 10mm to 25mm (about 1 inch). An assortment of 24 wooden spherical ended sticks with a length of 9cms. Made in India. White sanded wood - not varnished.

Price:£7.78
£9.14 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Emery Paper abrasive sheet (Ref: Emery)
2. Blades for Piercing Saw (Ref: SawBladeP)

54mm Wooden Doming Block with 2 punches

Ref: 92-050

A matt-finished wooden cube of about 2 inches with spherical indentations ranging from 3-4cms in diameter. Two wooden doming punches are included, each 11cms long and with domed heads of 1-2cms.

Price:£4.30
£5.05 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Silver Solder (Ref: SilSolder)
2. HIDE MALLET (Ref: 92-040)

SETTING BURRS (Set of 30)

Ref: 91-085

A set of 30 carbon-steel burrs, ranging in diameter from 1.0mm to 10mm, fitted in a round plastic storage holder with a transparent cover. The shanks are 1/8th inch diameter and just over 1 inch in length.

Price:£90.00
£105.75 Including VAT at 17.5%

Please insert Quantity:

BEADING TOOL (Set of 12)

Ref: 92-120

Used to form spherical 'beads' of metal as a 'claw' substitute, when fixing small stones. Tool set of 12 in sizes 2/0 to 10, with collet type mushroom handle. Mounted in a storage block.

Price:£14.04
£16.50 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Sapphire - Facet Cut - Dark colour (Ref: FacetSapp)
2. BLUE LACE AGATE rough. (100gms) (Ref: 20-012)

SCREWCUTTING Taps & Dies

Ref: 91-040

A set of five, low-cost, taps and a multiple die for making small screws or threaded holes in silver or gold. Made in India.

Price:£2.09
£2.46 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Blades for Piercing Saw (Ref: SawBladeP)
2. Triblet (Mandrel) (Ref: Triblet)

PIERCING SAW FRAME (Adjust.)

Ref: 91-060

Adjustable frame with a bow depth of 55mm. Rigid and well balanced with a hardwood handle. The blade is tensioned as it is clamped and the adjustment allows shorter lengths of broken blades to be used.
Blades are extra - please check the box below if blades are required or see Ref 'SawBladeGross' below.

Price (saw frame only):£4.21
£4.95 Including VAT at 17.5%

Please insert Quantity:

Blades are extra - please check here, if required and select from the following options;
Grade (Per pack of 12 blades)

People who bought this item also bought:
1. Blades for Piercing Saw (Ref: SawBladeP)
2. Silver Solder (Ref: SilSolder)

Blades for Piercing Saw

Ref: SawBladeGross

These bulk packs of one gross blades represent exceptional value from India ('Golden Sword' brand).
Fine tooth blades for piercing saws - approx 5"- (Packs of 144 blades) Please select grade required from the following options.
(4/0 is the finest, ranging to 0 which is medium)
PRICE SHOWN IN SHOPPING BASKET

Please insert Quantity:

Grade (per pack of 144 blades)

People who bought this item also bought:
1. Silver Solder (Ref: SilSolder)
2. PIERCING SAW FRAME (Adjust.) (Ref: 91-060)

Related products:
1. PIERCING SAW FRAME (Adjust.) (Ref: 91-060)

Blades for Piercing Saw

Ref: SawBladeP

High quality SWISS Blades for piercing saws - approx 5"-(Packs of 12 blades) Please select grade required from the following options.
(M4/0 is the finest, ranging to M4 which is coarse)

Price:£1.23
£1.45 Including VAT at 17.5%

Please insert Quantity:

Grade (per pack of 12 blades)

People who bought this item also bought:
1. Emery Paper abrasive sheet (Ref: Emery)
2. PIERCING SAW FRAME (Adjust.) (Ref: 91-060)

Related products:
1. PIERCING SAW FRAME (Adjust.) (Ref: 91-060)

Diamond Wire Blade

Ref: DiaPiercBlade2

Diamond electro-plated onto piano wire, offering fast cutting and long life.
Ideal for glass, ceramic or stone. Use in a piercing saw frame (see Ref 91-060 in the jewellery-making cutting and shaping section of this on-line catalogue) with 'Cut-Lube' lubricant Ref 91-084
See shopping cart for prices.

Please insert Quantity:

Please select from the following

'CUT-LUBE' LUBRICANT STICK

Ref: 91-084

A handy stick dispenser for lubricating burs, drills, gravers etc.
Helps prevent bur chatter ensuring a smooth seat for stone settings. This product can be used with diamond tools.

Price:£4.51
£5.30 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Diamond Wire Blade (Ref: DiaPiercBlade2)
2. PIERCING SAW FRAME (Adjust.) (Ref: 91-060)

RING STRETCHER

Ref: 92-068

Ring Stretcher Ref 92-068.
A roller device for enlarging rings, including those set with stones. Supplied with bench mounting and complete with 17 rollers (grooved and flat to cover most ring cross-sections.)

Price:£38.30
£45.00 Including VAT at 17.5%

Please insert Quantity:

PRONG LIFTER for Claw Settings

Ref: 94-068

A simple but effective tool for removing stones from claw settings without damage. Seven notches of different sizes.

Price:£8.47
£9.95 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. White Cubic-Zirconia - Facet cut (Ref: FacetCZ)
2. Emerald - Facet Cut - Extra Quality (Ref: EmerExtra)

CLAW SETTING JIG

Ref: 94-073

A tool for making claw settings, size 0.15 to 2cts, with 4, 6 or 8 prongs, small or large. The required number of wires are inserted into the slots, gripped by the retaining ring and the ends are then soldered together. The retaining ring is then withdrawn, the setting removed and cut to the desired length.

Price:£44.50
£52.29 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. White Cubic-Zirconia - Facet cut (Ref: FacetCZ)
2. Garnet - Facet cut (Ref: FacetGarnet)

DISC CUTTER 7 HOLE-INDIAN

Ref: 91-097

Although not the quality of the British-made tool ref 91-096 (see catalogue page 158), this is a functional tool at a budget price- and nicely presented in it's own plastic box !
Seven clearly marked punches (with a reference label on the box lid) in sizes from 1/4" to 5/8". Sheet thickness that can be punched will vary according to the material type and hardness to a maximum of 2.5mm

Price:£21.28
£25.00 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Gemstone Drop (top-drilled) (Ref: GemstDrop)
2. Emery Paper abrasive sheet (Ref: Emery)

SCRIBER Std.

Ref: 90-001

One piece double ended.

Price:£2.51
£2.95 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. BRUSH for BORAX (Ref: 93-062)
2. Silver Solder (Ref: SilSolder)

Related products:
1. STEEL RULE 6 inch (Ref: 90-020)

DIVIDERS 4inch Spring bow

Ref: 90-010

Spring type, with a solid knurled nut.

Price:£7.62
£8.95 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. CENTRE PUNCH Standard (Ref: 90-014)
2. TWEEZER Brass pickle (Ref: 95-037)

CENTRE PUNCH Standard

Ref: 90-014

Simple punch made from hardened and tempered steel - used for marking starting points for drill.

Price:£2.54
£2.98 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Faceted, foiled and flat-backed Glass (Ref: GlassFacetFlat)
2. DIVIDERS 4inch Spring bow (Ref: 90-010)

STEEL RULE 6 inch

Ref: 90-020

Spring steel graduated one side, metric 0.5 and 1mm to 15cm, and inches 1/64, 1/32, 1/16 to 6".

Price:£1.28
£1.50 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. White Cubic-Zirconia - Facet cut (Ref: FacetCZ)
2. Amethyst Cabochon (Ref: CabAmeth)

Related products:
1. SCRIBER Std. (Ref: 90-001)

BANGLE STRETCHING MACHINE

Ref: 92-066

Price:£144.68
£170.00 Including VAT at 17.5%

Please insert Quantity:

Wedding Ring Expand/Contract (India)

Ref: 92-067

Price:£95.00
£111.63 Including VAT at 17.5%

Please insert Quantity:

DRAW PLATE 63-Hole 4inch Round

Ref: 92-073

Price:£5.96
£7.00 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Draw Plates (Ref: DrawPlate)
2. Turquoise Cabochon (Matrix) (Ref: CabTurqMatrix)

DRAW PLATE 'D' 25 Hole 2-4mm

Ref: 92-075

Price:£5.96
£7.00 Including VAT at 17.5%

Please insert Quantity:

DRAW PLATE Square approx 1-4mm

Ref: 92-077

Price:£5.96
£7.00 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Turquoise Cabochon (Matrix) (Ref: CabTurqMatrix)
2. Draw Plates (Ref: DrawPlate)

DRAW TONG 8inch

Ref: 92-083

Steel tongs with 5/8" wide jaws.

Price:£11.49
£13.50 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. TRIGGER CLASP. 11mm Sterling Silver (Ref: 86-039)
2. NECKLET TAG. Sterling Silver (Ref: 86-154)

MANDREL BRACELET Smooth (USA)

Ref: 92-099

Bracelet long dimension from 4.5cms to 7.5cms. Overall mandrel length 17cms with a 3.5x2.5 rectangular mounting spigot.

Price:£42.90
£50.41 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. SKAMOLEX PLATE (Ref: 93-031)
2. JUMP RING 5mm (Ref: 86-033)

MANDREL BRACELET Stepped (USA)

Ref: 92-100

Made from cast iron and is ideal for shaping and stretching bracelets and large ovals. Polished.

Price:£46.20
£54.29 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Amethyst Cabochon (Ref: CabAmeth)
2. Bracelet Mandrel 38cms Oval Tapered 4-8cms (India) (Ref: 92-101)

Bracelet Mandrel 38cms Oval Tapered 4-8cms (India)

Ref: 92-101

Polished.

Price:£24.68
£29.00 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. HIDE MALLET (Ref: 92-040)
2. 3inch HANDLE for files (Ref: 92-013)

MILLIGRAIN TOOL (Set of 6)

Ref: 92-110

For putting a ‘bead’ effect on the edge of a bezel. The narrow tapered nose will reach into restricted areas. Six assorted sizes with a wooden ‘retaining’ block and a collet tool holder.

Price:£44.26
£52.01 Including VAT at 17.5%

Please insert Quantity:

GRAVER Round (INDIA)

Ref: 91-020

Price:£1.23
£1.45 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. GRAVER HANDLE Mushroom/flat (Ref: 91-027)
2. GRAVER Square (INDIA) (Ref: 91-021)

GRAVER Square (INDIA)

Ref: 91-021

Price:£1.23
£1.45 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. GRAVER HANDLE Mushroom/flat (Ref: 91-027)
2. GRAVER Round (INDIA) (Ref: 91-020)

GRAVER Flat (INDIA)

Ref: 91-023

Price:£1.06
£1.25 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. GRAVER HANDLE Mushroom/flat (Ref: 91-027)
2. GRAVER Square (INDIA) (Ref: 91-021)

GRAVER HANDLE Mushroom/flat

Ref: 91-027

Price:£0.64
£0.75 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. GRAVER Square (INDIA) (Ref: 91-021)
2. GRAVER Round (INDIA) (Ref: 91-020)

GRAVER HANDLE Pear

Ref: 91-028

Price:£0.64
£0.75 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Lapis Lazuli Cabochon (Ref: CabLapis)
2. Amethyst Cabochon (Ref: CabAmeth)

GRAVER HANDLE Mushroom

Ref: 91-030

Price:£0.64
£0.75 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. STAINLESS-STEEL SHOT (1 Kg) (Ref: 94-089)
2. SOAP for Barrelling (Ref: 94-087)

GRAVER HANDLE Ball

Ref: 91-031

Price:£0.64
£0.75 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. GRAVER Round (INDIA) (Ref: 91-020)
2. Mini Archimedian Spiral Hand-drill with spring (Ref: 91-050)

BROACH SET (Reamers 12pcs)

Ref: 91-037

Price:£25.45
£29.90 Including VAT at 17.5%

Please insert Quantity:

TUNGSTEN CARB.PT. for 91-047

Ref: 91-043

Price:£4.89
£5.75 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. ELECTRIC HAND ENGRAVER (Ref: 91-047)

Related products:
1. ELECTRIC HAND ENGRAVER (Ref: 91-047)

DIAMOND POINT for 91-047

Ref: 91-044

Price:£23.83
£28.00 Including VAT at 17.5%

Please insert Quantity:

Related products:
1. ELECTRIC HAND ENGRAVER (Ref: 91-047)

ELECTRIC HAND ENGRAVER

Ref: 91-047

For marking steel, brass, aluminium, copper, silver, plastics, ceramics, glass, pewter etc. Features a calibrated stroke adjustment and a powerful, 220 volt, reciprocating motor giving 7200 strokes per minute. Supplied with a tungsten carbide point. (Spare points available)

Price:£30.21
£35.50 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Card boxes (Ref: CardBox)
2. FINGER GAUGE Nickel rings (Ref: 97-006)

Related products:
1. TUNGSTEN CARB.PT. for 91-047 (Ref: 91-043)
2. DIAMOND POINT for 91-047 (Ref: 91-044)

Hand-Drill gear-operated with 3-jaw chuck

Ref: 91-042

A sturdy, traditional, hand-held drill with a smooth geared action and a 3-jaw chuck capable of taking drills from 0.5mm to 6.0mm (about 1/4 inch) in diameter. Made in India. Overall 29cms and weighing 820gms

Price:£8.65
£10.16 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Blades for Piercing Saw (Ref: SawBladeP)
2. TWIST DRILL 1.5mm (Ref: 91-057)

Mini Archimedian Spiral Hand-drill with spring

Ref: 91-050

10cms in length and with a 4-jaw chuck pin-vice suitable for drills up to 1.5mm diameter. The rotating action is achieved by means of a 9mm diameter knurled nut on a return spring. Made in India.

Price:£2.56
£3.01 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Silver Solder (Ref: SilSolder)
2. Sterling Silver Round Wire (Ref: SilRdWire)

BOW DRILL

Ref: 91-049

Traditional tool still in common use by professionals but requiring an acquired skill. Spindle length 34cms and brass wheel diameter of 6cms. Wooden hand grip 25cms.

Price:£11.06
£13.00 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Silver Solder (Ref: SilSolder)
2. Blades for Piercing Saw (Ref: SawBladeP)

Related products:
1. DRILL BIT Twist (1/32inch) (Ref: 91-052)
2. TWIST DRILL 1.5mm (Ref: 91-057)

DRILL BIT Twist (1/32inch)

Ref: 91-052

Price:£0.68
£0.80 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Blades for Piercing Saw (Ref: SawBladeP)
2. Emery Paper abrasive sheet (Ref: Emery)

DRILL BIT Twist (3/64inch)

Ref: 91-053

Price:£0.68
£0.80 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Blades for Piercing Saw (Ref: SawBladeP)
2. DRILL BIT Twist (1/32inch) (Ref: 91-052)

DRILL BIT Twist (1/16inch)

Ref: 91-054

Price:£0.84
£0.99 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Blades for Piercing Saw (Ref: SawBladeP)
2. DRILL BIT Twist (3/64inch) (Ref: 91-053)

TWIST DRILL 1mm

Ref: 91-056

Price:£0.84
£0.99 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. TWIST DRILL 1.5mm (Ref: 91-057)
2. DRILL BIT Twist (1/32inch) (Ref: 91-052)

TWIST DRILL 1.5mm

Ref: 91-057

Price:£0.84
£0.99 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. TWIST DRILL 1mm (Ref: 91-056)
2. TWIST DRILL 2.0mm (Ref: 91-058)

TWIST DRILL 2.0mm

Ref: 91-058

Price:£0.84
£0.99 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. TWIST DRILL 1.5mm (Ref: 91-057)
2. Turquoise Cabochon (Recon) (Ref: CabTurq)

DISC CUTTER PUNCH 8-hole

Ref: 91-096

An 8-hole disc cutter (5-16mm). 3mm gap between plates.
Punch diameters: 5mm, 6.5mm, 8.0mm, 9.5mm, 11.0mm, 12.5mm, 14.0mm and 16.0mm.

Price:£42.55
£50.00 Including VAT at 17.5%

Please insert Quantity:

People who bought this item also bought:
1. Triblet (Mandrel) (Ref: Triblet)
2. DIVIDERS 4inch Spring bow (Ref: 90-010)

Online Catalogue | JEWELLERY-MAKING SUPPLIES (Tools, Findings, Books, Silver, PMC) | Shaping & Cutting

We offer secure on-line payment ( via 'RBS Worldpay' or 'PayPal' ) that may be used with confidence. Ordering is quick and easy, with most orders despatched within 24-hours. Prices shown are in GB Pounds Sterling.

Chrome-plated, steel neck mandrels from India

Priced from:£50.00 £58.75 Including VAT at 17.5%

ROLLING MILL Square D & Flat 3 inch rolls (India)

Price:£150.00 £176.25 Including VAT at 17.5%

Cutter - Indian

Cutter - CEKA

Cutter -Klein

RING-CUTTING PLIER

Price:£29.79 £35.00 Including VAT at 17.5%

CUTTING WHEEL for 91-017

Price:£7.62 £8.95 Including VAT at 17.5%

SHEAR - BEADING

Price:£4.26 £5.01 Including VAT at 17.5%

Beading Scissors - 25mm curved jaws

Price:£3.00 £3.53 Including VAT at 17.5%

Triblet (Mandrel)

TRIBLET - Hexagonal 22cms long 9-23mm dia.(Indian)

Price:£15.32 £18.00 Including VAT at 17.5%

SHEAR Curved 7inch

Price:£21.02 £24.70 Including VAT at 17.5%

Shears

TRIANGULAR SCRAPER (Retract)

Price:£23.66 £27.80 Including VAT at 17.5%

TRIANGULAR SCRAPER

Price:£6.60 £7.76 Including VAT at 17.5%

Riffler File Set of 10 180 x 3mm

Price:£15.00 £17.63 Including VAT at 17.5%

NEEDLE FILE (Set of 12.14cm)

Price:£9.53 £11.20 Including VAT at 17.5%

COLLET NEEDLE FILE HANDLE

Price:£3.82 £4.49 Including VAT at 17.5%

NEEDLE FILE 1/2ROUND 14cm

Price:£3.53 £4.15 Including VAT at 17.5%

NEEDLE FILE HAND 14cm

Price:£3.53 £4.15 Including VAT at 17.5%

NEEDLE FILE Flat

Price:£3.53 £4.15 Including VAT at 17.5%

NEEDLE FILE Square

Price:£3.53 £4.15 Including VAT at 17.5%

NEEDLE FILE 3-Square

Price:£3.53 £4.15 Including VAT at 17.5%

NEEDLE FILE Round

Price:£3.53 £4.15 Including VAT at 17.5%

3inch HANDLE for files

Price:£0.64 £0.75 Including VAT at 17.5%

Diamond Files

Price:£7.87 £9.25 Including VAT at 17.5%

Diamond File economy (Japan) 14cms (Set of 5)

Price:£12.00 £14.10 Including VAT at 17.5%

ENGINEERS FILE 6inch Hand

Price:£5.52 £6.49 Including VAT at 17.5%

ENGINEERS FILE 6inch Half-round

Price:£7.23 £8.50 Including VAT at 17.5%

HIDE MALLET

Price:£9.77 £11.48 Including VAT at 17.5%

HAMMER Ball Pein 4oz.

Price:£9.78 £11.49 Including VAT at 17.5%

HAMMER Cross-pein

Price:£7.23 £8.50 Including VAT at 17.5%

25mm Chasing hammer with Pistol Handle

Price:£6.00 £7.05 Including VAT at 17.5%

HAMMER Planishing

Price:£16.13 £18.95 Including VAT at 17.5%

Draw Plates

Priced from£5.10 £5.99 Including VAT at 17.5%

Collet Plates

SWAGE BLOCK 6-groove4-10mm and Flat

Price:£16.17 £19.00 Including VAT at 17.5%

Steel Dapping Block 27-hole 2-25mm 125x60x22mm

Price:£20.00 £23.50 Including VAT at 17.5%

SWAGE Block with 21 grooves 2-18mm wide

Price:£20.00 £23.50 Including VAT at 17.5%

HORN ANVIL WITH BASE

Price:£6.81 £8.00 Including VAT at 17.5%

MINIATURE BENCH ANVIL

Price:£10.00 £11.75 Including VAT at 17.5%

DOMING BLOCK5cms BRASS INDIAN

Price:£20.00 £23.50 Including VAT at 17.5%

DOMING BLOCK 6.5cms BRASS INDIAN

Priced from:£50.00
£58.75 Including VAT at 17.5%

Price:£150.00
£176.25 Including VAT at 17.5%

Price:£29.79
£35.00 Including VAT at 17.5%

Price:£7.62
£8.95 Including VAT at 17.5%

Price:£4.26
£5.01 Including VAT at 17.5%

Price:£3.00
£3.53 Including VAT at 17.5%

Price:£15.32
£18.00 Including VAT at 17.5%

Price:£21.02
£24.70 Including VAT at 17.5%

Price:£23.66
£27.80 Including VAT at 17.5%

Price:£6.60
£7.76 Including VAT at 17.5%

Price:£15.00
£17.63 Including VAT at 17.5%

Price:£9.53
£11.20 Including VAT at 17.5%

Price:£3.82
£4.49 Including VAT at 17.5%

Price:£3.53
£4.15 Including VAT at 17.5%

Price:£3.53
£4.15 Including VAT at 17.5%

Price:£3.53
£4.15 Including VAT at 17.5%

Price:£3.53
£4.15 Including VAT at 17.5%

Price:£3.53
£4.15 Including VAT at 17.5%

Price:£3.53
£4.15 Including VAT at 17.5%

Price:£0.64
£0.75 Including VAT at 17.5%

Price:£7.87
£9.25 Including VAT at 17.5%

Price:£12.00
£14.10 Including VAT at 17.5%

Price:£5.52
£6.49 Including VAT at 17.5%

Price:£7.23
£8.50 Including VAT at 17.5%

Price:£9.77
£11.48 Including VAT at 17.5%

Price:£9.78
£11.49 Including VAT at 17.5%

Price:£7.23
£8.50 Including VAT at 17.5%

Price:£6.00
£7.05 Including VAT at 17.5%

Price:£16.13
£18.95 Including VAT at 17.5%

Priced from£5.10
£5.99 Including VAT at 17.5%

Price:£16.17
£19.00 Including VAT at 17.5%

Price:£20.00
£23.50 Including VAT at 17.5%

Price:£20.00
£23.50 Including VAT at 17.5%

Price:£6.81
£8.00 Including VAT at 17.5%

Price:£10.00
£11.75 Including VAT at 17.5%

Price:£20.00
£23.50 Including VAT at 17.5%

Price:£34.00
£39.95 Including VAT at 17.5%

Price:£7.23
£8.50 Including VAT at 17.5%

Price:£10.64
£12.50 Including VAT at 17.5%

Price:£10.21
£12.00 Including VAT at 17.5%

Price:£16.17
£19.00 Including VAT at 17.5%

Price:£7.78
£9.14 Including VAT at 17.5%

Price:£4.30
£5.05 Including VAT at 17.5%

Price:£90.00
£105.75 Including VAT at 17.5%

Price:£14.04
£16.50 Including VAT at 17.5%

Price:£2.09
£2.46 Including VAT at 17.5%

Price (saw frame only):£4.21
£4.95 Including VAT at 17.5%

Price:£1.23
£1.45 Including VAT at 17.5%

Price:£4.51
£5.30 Including VAT at 17.5%

Price:£38.30
£45.00 Including VAT at 17.5%

Price:£8.47
£9.95 Including VAT at 17.5%

Price:£44.50
£52.29 Including VAT at 17.5%

Price:£21.28
£25.00 Including VAT at 17.5%

Price:£2.51
£2.95 Including VAT at 17.5%

Price:£7.62
£8.95 Including VAT at 17.5%

Price:£2.54
£2.98 Including VAT at 17.5%

Price:£1.28
£1.50 Including VAT at 17.5%

Price:£144.68
£170.00 Including VAT at 17.5%

Price:£95.00
£111.63 Including VAT at 17.5%

Price:£5.96
£7.00 Including VAT at 17.5%

Price:£5.96
£7.00 Including VAT at 17.5%

Price:£5.96
£7.00 Including VAT at 17.5%

Price:£11.49
£13.50 Including VAT at 17.5%

Price:£42.90
£50.41 Including VAT at 17.5%

Price:£46.20
£54.29 Including VAT at 17.5%

Price:£24.68
£29.00 Including VAT at 17.5%