Polishing

Polishing

We offer secure on-line payment accepting most cards - via Worldpay or PayPal. Ordering is quick and easy, with orders received before 1.00 p.m. being despatched the same day.

Online Catalogue | Jewellery Making Supplies | Polishing

TUMBLER 900gm BEACH +BARREL(for stone)

Ref: 10-006

TUMBLING MACHINE.
This is a low cost and popular introduction to pebble-polishing for people of any age and it is supplied with a 900gm capacity barrel and full instructions.
If spare barrels are required see Ref 10-011 in this section (or 10-012 for vaned barrel to use with metal)
This is a good value machine, ideal for beginners or those requiring only a small output from their machine. Not as versatile as the twin barrel units but still capable of doing the job for which it is intended.

See also our 'SPECIAL OFFER' bundled beginners machine at the top of this page.
****Please note this machine is for 220/240volt use only****

Priced from:£54.04
£64.85 Including VAT at 20%

Please insert Quantity:

Click here if Media pack is required. Abrasive/Polish pack Ref 19-015 (enough for about 6 months). Ref 19-015

Click here if a pack of Rough Stone is required. (Assorted types and sizes but of similar hardness)

Please select the stone type required. (Agate is the most popular)

Our Instruction Booklet Ref 16-025 will be included free of charge at the time of ordering this machine

Click here if an additional barrel (for metal finishing) is required. (10-012)

Click here if Stainless Steel Shot (94-089) is required for metal finishing.

Click here if tumble soap (94-087) is required for use with steel shot.

Our current catalogue (Issue 24) will be included without extra charge.

People who bought this item also bought:

1. BARREL 900gm PLASTIC BEACH (Ref: 10-011)

Related products:

1. BOOK How to TUMBLE POLISH (Ref: 16-013)

Beach 2lbs Tumbler Discounted Starter Bundle

Ref: 10-006Bundle2

This is a low cost British manufactured, popular introduction to pebble-polishing for people of any age is supplied with a 900gm capacity plastic barrel, full instructions and abrasive/polish media: sufficient grit and polish - supplied in re-useable screw-lid clear acrylic containers - for two batches. Course, Medium & Fine Silicon Carbide abrasive + Cerium Oxide) and a comprehensive booklet (16-025) entitled 'Tumble Stone Polishing' : all saving pounds off the normal list price.
***** DISCOUNT OFFER APPLIES ONLY TO ORDERS PLACED ON-LINE *****
If an additional barrel is required see Ref 10-011 in this section. See also Agate & Quartz mixed packs of tumbling rough shown below and in the store section headed 'Rough Rock'.
This is a reliable, good value, tumble polisher which will provide years of economical (30 watt) use: ideal for beginners. Low running costs.
****Please note this machine is for 220/240volt use only****

DISCOUNTED Offer Price:£54.95
£65.94 Including VAT at 20%

Please insert Quantity:

Click here if Stainless Steel Shot (94-089) is required for metal finishing. (Additional cost will be added to shopping cart).

Click here if tumble soap (94-087) is required for use with steel shot.(Additional cost will be added to shopping cart).

Click here if a vaned barrel (10-012) is also required (essential for metal finishing).(Additional cost will be added to shopping cart).

If tumbling rough rock is required then select from the options below (Assorted types and sizes but of similar hardness)

Please select the stone type required. (Agate is the most popular but quartz has the brightest colours)

Click here to see the media pack.

People who bought this item also bought:

1. TUMBLING AGATE MIX (Pack of 700gms) (Ref: 20-099)

2. TUMBLING QUARTZ MIX (Pack of 700gms) (Ref: 20-100)

Related products:

1. BOOK How to TUMBLE POLISH (Ref: 16-013)

2. BELT for 10-006 (Ref: 10-014)

3. Retail CATALOGUE - Issue 24 - Free-of-charge (Ref: 16-100)

JUNIOR TUMBLER (EXCL BARRELS)

Ref: 10-033

This small unit (30 watt) has the benefit of a larger capacity than the Beach Mini (see 10-006 this section) and also incorporates a nylon reinforced toothed timing belt drive which will not slip or wear out.
Full 1400gms capacity making it ideal as a low-priced unit with the versatility of two 700gm barrels or one 1400gm barrel. Rubber barrels can be used if noise is a problem.
Please select (tick the boxes) barrels (and other OPTIONAL extras) from the items below.
Price for machine with selected options will appear in your 'shopping cart'. You can change you mind for options at any stage if you wish (go to 'view cart').
****Please note this machine is for 220/240volt use only****

Priced from:£68.75
£82.50 Including VAT at 20%

Please insert Quantity:

Click here if Stainless Steel Shot (94-089) is required for metal finishing. (Additional cost will be added to shopping cart).

Click here if tumble soap (94-087) is required for use with steel shot.(Additional cost will be added to shopping cart).

Click here if barrels are required then select type and quantity.

Please select plastic (low cost) or Rubber (quiet & easy to use)..

Click here if rough rock is required then select type and quantity. Agate is more popular

Type

Click here if media (Abrasive & Polish powders) are required. Media Pack Ref 19-015 (Enough for about 6 months use)

Our Instruction Booklet Ref 16-025 will be included free of charge at the time of ordering this machine

Our current catalogue (Issue 24) will be included without extra charge.

People who bought this item also bought:

1. POLISHING PELLETS 250gms (Ref: 17-021)

2. BARREL 900gm PLAS/VANES BEACH (Ref: 10-012)

Related products:

1. BOOK How to TUMBLE POLISH (Ref: 16-013)

2. CR/JUNIOR DRIVE BELT (Ref: 10-042)

3. 700gms BARREL PLASTIC Evans (Ref: 10-038)

METALSMITH TUMBLER CR4 Excl. Barrel

Ref: 10-032

This British 'Metalsmith' machine (Ref 10-032) has all the construction features of the 'CR' Stone Polisher 10-030 but is adapted with thicker shafts and larger motor (46 watts) to make it suitable for finishing castings etc., using shot and soap (See 94-087 and 94-089)
A rubber barrel, with internal mixing vanes is required (see code 10-037 - not included with 10-032 unless requested - tick box below).
The CR machines are leaders in the small tumbler field, being fitted with a revolutionary drive ensuring trouble free operation. No more broken or slipping belts, this problem having been overcome by the use of nylon reinforced toothed timing belt drives.
British made with an all metal body and enclosed power and drive unit making them particularly safe. Spherical self-aligning sintered bronze bearings on the drive shafts offering exceptionally smooth and quiet operation. Supported on rubber feet.
Fully guaranteed and full instructions included. Barrel is extra as mentioned above.